All publications may be purchased from our distributors, Standards Australia Webstore (powered by Techstreet), and SAI Global.
Rough‑terrain trucks - Safety requirements and verification, Part 1: Variable‑reach trucks (ISO 10896‑1:2012, MOD)
Product designation: AS 10896.1:2019
Abstract: The objective of this Standard is to provide requirements for rough terrain self-propelled variable reach trucks that are intended to handle loads with forks and different types of attachments.
History: First published as AS 1418.19—2007. Revised and redesignated as AS 10896.1:2019.
Industrial trucks - Safety requirements and verification, Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads (ISO 3691‑3:2016, MOD)
Product designation: AS 5144.3:2019
Abstract: The objective of this Standard is to provide safety requirements and the means for their verification, for trucks intended for travel with elevated loads and an elevating operator position.
History: First published as AS 5144.3:2019.
Powered industrial trucks, Part 1: General requirements
Product designation: AS 2359.1:2019
Abstract: The objective of this Standard is to set out additional requirements not found in AS 2359.6 for the design, manufacture, marking and testing of self-propelled industrial trucks (hereafter referred to as trucks) and their attachments, as defined in ISO 5053‑1.
History: Originated as part of AS B270—1968. Previous edition AS 2359.1—1995. Fourth edition 2015. Fifth edition 2019.
Safety glazing for land vehicles
Product designation: AS 2080:2019
Abstract: This Standard specifies requirements and includes methods of test for flat and curved toughened and laminated safety glazing for windscreens and other glazing for land vehicles
History: Originated as AS R1 - 1941. Previous edition AS/NZS 2080:2006. Revised and redesignated as AS 2080:2019.
Manual of uniform traffic control devices, Part 15: Direction signs, information signs and route numbering
Product designation: AS 1742.15:2019
Abstract: This Standard specifies requirements and gives recommendations for the design and use of direction signs and related navigational aids including route numbering for all roads including expressway type roads.
History: Originated as part of AS CA14—1935 and part of AS 1742.1—1975. Previous edition AS 1742.15—2007. Second edition AS 1742.15:2019.
Manual of uniform traffic control devices, Part 14: Traffic Signals (Amendment No. 1)
Product designation: AS 1742.14:2014 Amd 1:2019
Abstract: This standard is one in a series of fourteen Standards which together form the Manual of uniform traffic control devices.
History: Originated as AS 1742.14—1996. Second edition designated as AS 1742.14:2014. Reissued incorporating Amendment No. 1 (September 2019).